Nihal Techno Solutions
Warje Malwadi., Pune, Maharashtra
GST No. 27AKOPP7408H1ZP
TrustSEAL Verified
Call 08048709475 100% Response Rate
SEND EMAIL

Sewage treatment plant

Prominent & Leading Manufacturer from Pune, we offer sewage treatment plant, demineralisation plant and effluent treatment plant.

Sewage Treatment Plant

Sewage Treatment Plant
  • Sewage Treatment Plant
Get Best Quote
Approx. Price: Rs 4.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automation GradeAutomatic
Air Blower Power (kW)1 kW, 1.5 kW
Installation/Civil WorkInstallation Available
Water Pump Power1.5 kW, 5 kW, 2 kW, 1 kW
VoltageAC 440 V / 60 Hz
Max. Suction Pressure60 Kpa
ChlorineLess than 0.5mg/l
Capacity1 m3/hr - 12.5 m3/hr

Advantages:
  • Easy installation
  • Less space requirement
  • Easy operation and maintenance.

Highlights of our Sewage treatment plant :
  • Customized technologies to suit stringent site conditions
  • Consistent supply of treated water
  • Low operating & maintenance cost
  • Minimum foot print area
  • Low power consumption
  • Minimum use of chemicals
  • Focus on ease of maintenance while designing
  • Trained team for installation & after sales service
  • Environment-friendly systems
  • Plants with parameters meeting PCB norms
  • Overcomes factors of space and height constraints
Request
Callback


Additional Information:

  • Delivery Time: 6 to 8 weeks
Yes! I am Interested

Demineralisation Plant

Demineralisation Plant
  • Demineralisation Plant
Get Best Quote
Approx. Price: Rs 2.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automation GradeSemi-Automatic
Capacity (LPH)100 LPH, 1000 LPH, 500 LPH, 2000 LPH, 5000 LPH
ApplicationIndustrial Application
Installation ServiceYes
Material of ConstructionFRP, SS Powder Coating, SS

The cation and anion exchanger pressure vessels are fabricated from mild steel, lined internally with rubber. Each is fitted at the top and bottom with strainer plates to retain the exchangers within the vessels and to ensure uniform distribution and flow of water and regenerant through the unit. Frontal piping with necessary valves, all of corrosion resistant materials of construction are fitted on the units to direct the flow water and regenerant. Regeneration tank, one each for acid and caustic soda are provided from which measured quantities of regenerant solutions are injected into the unit by means of hydraulic ejectors. A conductivity indicator with cell is provided for continuous measurement of treated water purity. 

Process: These are two stage deionizers comprise two pressure vessels of corrosion resistant material, one containing cation exchanger and the other an anion exchanger. The cation exchanger converts all ionised solids in the influent water to their equivalent acids, which are absorbed by the anion exchanger when the water passes through it. The water emerging is deionised or deminerlised water with only traces of the dissolved solids present in the water before treatment. When Cation and Anion exchangers are exhausted, they are regenerated, the cation with hydrochloric acid and anion with caustic soda.

Degasification System: The CA Units can be supplied with optional extra equipment such as a degasser to handle certain types of raw waters. A degasser consists essentially of a degasser tower with integral tank, a degasser air blower and a degassed water pump with necessary piping and valves to connect this system to the CA Unit.

Process: The carbon dioxide can be removed mechanically by means of degasser. Cation treated water enters the tower from the top, flowing downwards. The pall rings break-up the flow to expose the maximum surface area to the air from the blower upwards. This ‘Strips’ the carbon dioxide from the water which is vented to the atmosphere from the top.

Mixed Bed: Mixed Bed demineraliser comprises of a single MS rubber lined vessel containing cation and anion strong base exchangers, fitted internally with inlet, outlet and regenerant distributors. The necessary pipe work and valves are fitted externally. To mix the two ion exchangers an air blower is provided. Unit is provided along with pressure gauges, Conductivity meter, and an orifice board for the drain sump to indicate the various regeneration flows involved.


Process: Mixed Bed demineraliser consists of a single column of strong acid cation Resin and a strong base anion Resin that are intimately mixed. Water passing through the column is subjected to an infinite number of deminerlising stages. This produces deminerlised water of externally high purity. Mixed Bed demineralisers are regenerated with acid and caustic. The Resins are separated by backwashing where the lighter anion exchanger is carried to the top of the column and the heavier cation exchanger sinks to the bottom. After regeneration the two ion exchangers are thoroughly remixed with compressed air.

Water Quality: Electrical conductivity is used for expressing the purity of demineralised water. Conductivity is proportional to the residual ionized solids in the water. Low conductance indicates water of high purity, and typical DM water has a conductivity of less than 30us/cm2 and Mixed Bed demineralised water has a conductivity of less than 1us/cm2

 

 

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested

Effluent Treatment Plant

Effluent Treatment Plant
  • Effluent Treatment Plant
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
Feed Flow Rate (cubic-meter/day)0 - 50 m3/day,51 - 100 m3/day,101 - 500 m3/day,501 - 1000 m3/day,>1000 m3/day
Automation GradeSemi-Automatic
Water SourceIndustrial Wastewater, Industrial Effluent
IndustryLeather Industry, Distillery, Chemical/Petroleum Industry, Paper Mills, Dairy Industry, Pharmaceutical Industry, Slaughter House, Automobile, Sugar Industry
Water Pump Power1.5 kW, 2 kW, 5 kW, 1 kW
Secondary Treatment TypeDissolved Air Floatation, Fluidized Aerated Reactor, Fixed Film Bioreactor, Activated Sludge, Moving Bed Bioreactor (MBBR), Trickling Filters, Reverse Osmosis
Air Blower Power (kW)1.5 kW, 0.5 kW, 0.4 kW, 0.75 kW, 0.25 kW
Treatment StagesTertiary Treatment, Primary Treatment, Preliminary Treatment, Secondary Treatment, Disinfection
Installation TypePrefabricated, Completes Civil work with Installation
Material of ConstructionMild steel
Power12-30 kW

We  offers wide range of effluent treatment plants for chemical industry, textile mills, slaughter houses, diaries, paper mills, oil refineries, pickling plants, glass factories, chemical and pharmaceutical industries, food and engineering industries, Automobile industries, Hospital wastewater etc. based on advanced technologies. Our main focus is to understand the customer requirements We also offer prefabricated/ packaged ETP plants depending on the waste water quantity and quality.

 We supply the plants based on the following process technologies:-

1.      Aerobic Treatment based on:

·         Moving Bed Bio Reactor (MBBR)

 

·         Fluidized Bed Reactor (FAB)

·         Submerged Aerobic Fixed Film Reactor (SAFF)

·         Extended Aeration (EA)

·         Membrane Bio Process (MBR)

·         Activated Sludge Process (ASP)

2.      Anaerobic Treatment

3.      Combination of Anaerobic Treatment and Aerobic Treatment

4.      Physico-Chemical Processes

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 6 to 8 weeks
Yes! I am Interested
X

Explore More Product

Floating Aerators
Floating Aerators
Get Best Quote
Fixed Aerators
Fixed Aerators
Get Best Quote
Tube Settlers
Tube Settlers
Get Best Quote
Dual Media Filter
Dual Media Filter
Get Best Quote


Reach Us
Suchitra Gopalkrishna Prabhu (CEO)
Nihal Techno Solutions
Building E-1 Flat.5, Popular Nagar
Warje Malwadi., Pune - 411052, Maharashtra, India


Call Us


Send E-mailSend SMS